Support IEEE 802.1d、IEEE 802.1w、IEEE 802.1s、IEEE 802.1p、IEEE 802.3、IEEE 802.3u、IEEE 802.3x、IEEE 802.3z、IEEE 802.3ab、IEEE 802.3ae standards ; L3 management, support DHCP Server, QoS, ACL, SNMP V1/V2/V3, IGMP Snooping v1/v2； Support STP/RSTP/MSTP (ERPS), Support loop detection and self-healing, support remote loopback monitoring and control（802.3ah OAM）; Support IPV4/IPV6,RIP,OSPF Support multiple VLAN division, MAC VLAN, Protocol VLAN, Private VLAN; Support IP address + MAC address + VLAN+Port binding, DHCP Snooping, support IP source and DAI protection;

8*Gigabit RJ45 Ports Support IEEE802.3、 IEEE802.3u、 IEEE802.3ab standard The Ethernet ports supports 10/100/1000M auto-adaptation Auto MDI/MDIX） Panel indicator monitoring the status and help failure analysis; Flow control mode: full-duplex adopts IEEE 802.3x standard, half-duplex adopts Back pressure standard； Support QoS data priority Support cable detection, loop protection Port electrostatic protection, Power port differential mode ±2KV, communication port common mode ±6KV

Support international standard IEEE802.3 af(13W); · POE port Support 10/100/1000Mbps data transmission · PD support 37V-57V voltage transmission,Automatically      detects power supply from PSE power supply module  · 5V/2A power output using DC Jack  ( Type-C,Micro-USB) · Support the isolation circuit protection,can effectively protect   electrical equipment. · 1500V high voltage isolation  · Support the short circuit,overvoltage protection

· Support international standard IEEE802.3 af(13W); · POE port Support 10/100Mbps data transmission · PD support 37V-57V voltage transmission,Automatically       detects power supply from PSE power supply module  · 5V/2A power output using DC Jack  ( Type-C,Micro-USB) · Support the isolation circuit protection,can effectively protect   electrical equipment. · 1500V high voltage isolation  · Support the short circuit,overvoltage protection · Support overvoltage protection,short circuit   protection,overcurrent

Transmission Signal: 4 Channel Support format: TVI/CVI/AHD/CVBS Compatible Format:NTSC, PAL & SECAM Maximum Support Pixel: 8MP(compatible 720P/1080P/3MP/4MP/5MP) Transmission Distance: 720P:1312ft(400m), 1080P:820ft(250m); 3MP-8MP:656ft(200m) Category Type: UTP CAT5/5E/6 Interface name: Network cable connection port + RJ45 + BNC

Model : LS-POE-1210EL  network Protocol: IEEE802.3af ,isolator Input voltage : DC38-56V Output voltage :DC12VV/1.5A-2A Switching rate: 95% Poe power supply type: 1236/4578 Transmission rate: 10M/100Mbps Transmission distance : 150 meter (cat5e) Anti-thunder class: 18KV

1,3 10/100/1000mbps Ethernet ports 2,Comply to IEEE 802.3, IEEE 802.3u 3,Comply to POE IEEE 802.3af/at standard and non-standard POE 4,Support POE IPC camera, POE WIFI AP/CPE, and POE IP PHONE. 5,Flow Control: Full-duplex:IEEE 802.3x, Half-duplex: back pressure. 6,Auto MDI/MDIX. 7,Upstream port lightning protection. 8,Support MAX POE 30w 9,Store-and-forward.

24*10/100M POE ports + 2* 10/100/1000M Ethernet Uplink ports+1* Gigabit SFP Uplink Port； Comply with IEEE 802.3, IEEE 802.3u, IEEE802.3ab ,IEEE802.3z IEEE802.3x standards； Ethernet port supports 10/100M adaptive； Flow control mode: full-duplex adopts IEEE 802.3x standard, half-duplex adopts Back pressure standard； Support port auto flip (Auto MDI/MDIX)； Automatically supplied to adaptive devices； Panel indicator monitoring status and help failure analysis； Support for VLAN mode, OFF mode and Extend mode； Compatible with 1 U rack installation

1.LS-PE0522MK support IEEE802.3af at，size :80*45*27mm，High-performance high-power POE products with photoelectric isolation. The output power is to meet the power consumption requirements of more than 98% of the cameras in the market 2.Used SY5603 chips，With standard isolation transformer 40~57V，and various protection circuits！ 3.POEprotocol：IEEE802.3af/at 4.Transmission rate：10/100/1000Mbps 5.Compatible with non -PoE-standard 48V power （get throught L45+，L78—） 6.PoE Power：20W （5V4A） 7.Isolation Voltage：1500V

Model：LS-POE-06120A 1.Port 3-8 for PoE In, Port7- 8 for PoE Out 2.Support fixed VLAN, No.1 Port to No. 6Port can not communicate with each other, but they all can communicate with No.8 Port 3.  Support 9v-57v Passive PoE compliant PSD and PD. 4.  Output 12vdc power supply via dc jack, which can be supplied to ONT 5.  Plug and play 6.  Support Green Ethernet

1.Comply with IEEE802.3af power over Ethernet 2.10/100M supported 3.Extend the range of POE an additional 120 meters 4.Automatically detects and protects Poe equipments from being damaged by incorrect installation. 5.Plug-and Play no configuration required